10G EPON Optical Module

NT-10GEPON-S is designed for single mode fiber and operates at wavelength of 1270nm. The transceiver module uses a DFB laser diode and fully compliant with IEC60825 and CDRH class 1 eye safety. It contains APC functions, a temperature compensation circuit to ensure compliance with IEEE 802.3av requirements at operating temperature. The receiver section uses a hermetic packaged APD-TIA (APD with trans-impedance amplifier) and a limiting amplifier. The APD converts optical power into electrical current and the current is transformed to voltage by the trans-impedance amplifier. The differential DATA and /DATA CML data signals are produced by the limiting amplifier. The APD-TIA is AC coupled to the limiting amplifier through a low pass filter. 

NT-10GEPON-A is designed for single mode fiber and operates at wavelength of 1310nm. The transceiver module uses a DFB laser diode and fully compliant with IEC60825 and CDRH class 1 eye safety. It contains APC functions, a temperature compensation circuit to ensure compliance with IEEE 802.3av requirements at operating temperature. The receiver section uses a hermetic packaged APD-TIA (APD with trans-impedance amplifier) and a limiting amplifier. The APD converts optical power into electrical current and the current is transformed to voltage by the trans-impedance amplifier. The differential DATA and /DATA CML data signals are produced by the limiting amplifier. The APD-TIA is AC coupled to the limiting amplifier through a low pass filter. 

NT-10GEPON-S

• Single Fiber10G symmetrical EPON ONU Transceiver
• 1270nm burst-mode 10.3125 Gb/s transmitter with DFB laser
• 1577nm continuous-mode 10.3125Gb/s APD/TIA receiver
• Digital diagnostic monitoring (DDM)with internal calibration
• SFP+ package with SC/UPC receptacle connector
• +3.3V separated power supply, low power dissipation
• LVPECL interface logic level for data input
• CML interface logic level for data output
• LVTTL for burst signal input
• LVTTL for receiver loss of signal detect indication
• Compliant with IEEE 802.3av
• SFF-8472 compliant
• Telcordia GR-468-CORE and MIL-STD-883 compliant
• RoHS-6/6 compliant
• Operating temperature range: Commercial: 0℃~70℃
• IEC 60825-1 compliant
• FCC Part 15 Class B /EN55022 Class B (CISPR 22B)/ VCCI Class B compliant

NT-10GEPON-A

• Single Fiber 10G asymmetrical EPON ONU Transceiver
• 1310nm burst-mode 1.25 Gb/s transmitter with DFB laser
• 1577nm continuous-mode 10.3125Gb/s APD/TIA receiver
• Digital diagnostic monitoring (DDM)with internal calibration
• SFP+ package with SC/UPC receptacle connector
• +3.3V separated power supply, Low power dissipation
• LVPECL interface logic level for data input
• CML interface logic level for data output
• LVTTL for burst signal input
• LVTTL for receiver loss of signal detect indication
• Compliant with IEEE 802.3av
• SFF-8472 compliant
• Telcordia GR-468-CORE and MIL-STD-883 compliant
• RoHS-6/6 compliant
• Operating temperature range: -40℃ ~ +85℃
• FCC Part 15 Class B /EN55022 Class B (CISPR 22B)/ VCCI Class B compliant.

• Symmetric 10GEPON PR30 ONU

• Asymmetric 10GEPON PRX30 ONU